Hydraulic vulcanization press 400×400 – 1st floor 80 tons
1. Compression force 80 tons;
2. Plate size: 400×400 mm;
3. Piston stroke not less than 220 mm;
4. Number of floors: 1;
5. Number of plates: 2 pcs;
6. Heating plate power: not more than 4 kW;
7. Maximum temperature: 250 ℃;
8. Engine power, not more than 3 kW;
9. Frame type: frame;
10. Accuracy of maintaining plate temperature: +/- 2 ℃.;
11. Overall dimensions, not more than 1500x600x1700 mm.
For more details, see the Specification (Below)
Technical characteristics
frame hydraulic vulcanization press 400×400 mm – 1 floor 80 tons
| № п/п | Name | Characteristics |
| 1 | Compression force | 80 t |
| 2 | Piston stroke, not less than | 220 mm |
| 3 | Distance between slabs | 200 mm |
| 4 | Size of slabs | 400х400 mm |
| 5 | Number of slabs | 2 pcs |
| 6 | Number of floors | 1 pcs |
| 7 | Thickness of the upper and lower plates, not less than | 50 mm |
| 8 | Stove temperature control system | Automatic, PID controllers |
| 9 | Type of heating plate | Electric, heating elements |
| 10 | Heating plate power, no more than | 4 kW |
| 11 | Accuracy of maintaining the temperature of the plates | ±1 ℃ |
| 12 | Temperature distribution accuracy over 90% of the plate area | ±2 ℃ |
| 13 | Maximum temperature | 200 ℃ |
| 14 | Engine power, no more than | 3 kW |
| 15 | Total maximum power, no more than | 11 kW |
| 16 | Frame type | Frame |
| 17 | Opening speed / Closing speed | 400 / 200 mm/min. |
| 18 | Vulcanization duration, adjustable | Yes up to 99 min. |
| 19 | Timer for turning on the press heating | Yes |
| 20 | Overall dimensions, no more than | 1500х600х1700 mm |
| 21 | Weight, no more than | 1100 kg |
| 22 | Location of the hydroelectric power station | Lateral, right |
| 23 | Control device | Programmable Relay / Controller |
| 24 | Control mode | Manual/Automatic |
Two versions. What is the difference? Prices
1 вариант исполнения: с ручным управлением
- 1. The controller is missing (see item 23 in the table);
- 2. Manual control mode (the pump is started by a button, closing, opening and pressing are carried out by means of the hydraulic distributor control lever;
- 3. There is no timer (see item 18 in the table) – instead, the kit includes an electronic clock with a countdown function and an audible signal.
2nd version: with automatic control
The control controller allows you to:
The control controller allows you to:
- setting the holding time during pressing;
- setting the opening distance by time or by position sensor;
- установки времени выдержки в открытом состоянии;
- settings for the open state holding time;
- holding time during vulcanization;
- Set the timer for preheating on days of the week.
Additional information
Always ready to help
Information on components:
- Temperature control devices: EMCO – Türkiye, or similar;
- Oil station engine: AIR – Russia, or similar;
- Hydraulic plate: OMT, Italy, or similar;
- Pump: Russia or Bulgaria, or similar;
- Electromagnetic hydraulic distributor: China or similar;
- Electromagnetic contactors: IEK, China, or similar;
- Solid state relays: ELHART, China, or similar;
- Filters: SIFIMA, Italy, or similar;
- Hydraulic components: fittings, tubes, other hydraulic components – Italy (OMT, ATOS, etc.), or analogue;
- Heating elements: Russia;
- Cuffs and seals: standard, Russia.
Похожие товары
ЗАПРОСИТЬ ЦЕНУ!
Продукт: Hydraulic vulcanization press 400×400 – 1st floor 80 tons
ОТВЕТИМ В ТЕЧЕНИЕ 15 МИНУТ!
Отправляя заявку, Вы разрешаете сбор и обработку персональных данных. Политика конфиденциальности.