We realize devices pulling 800×90 with tracks, with pneumatic clamp

Ask your questions regarding the acquisition of these machines to the Sales Department by telephone:

+7 (902) 383-61-02

E-Mail: MANAGER@OOO-KOMED.RU

Specifications and photos of the device are presented below.

To ask a question in writing, click the order button.

Specifications

№ п/п	Parameter	Value
1	The length at which the tracks contact the product	800 mm
2	Working track width	90 mm
3	Pull element	Tracks mounted on a chain
4	The height of the working surface of the lower track tape	900 mm
5	Asynchronous motor 3 phases 0.75 kW	2 pcs
6	Total power	1,5 kW
7	Engine control	Frequency drive
8	Dimensions	Length, no more than 1100 mm Width approximately 500 mm Height, no more than 1500 mm
9	The maximum distance between the tapes	80
10	Meters	Encoder and pulse counter
11	The position of the upper tape is adjustable:	Pneumatic cylinders, optionally a flywheel can be installed
12	Linear speed	1 … 20 m / min.
13	Position of the lower track tape	Fixed
14	Pressure force of pneumatic cylinders at a pressure of 6 atm.	Not less than 700 kg

The mechanism of pneumatic pressing of the upper tape, consisting of 2 pneumatic cylinders.
Remote control for lifting and lowering the pneumatic cylinders.
The haul device has a connector for air supply.
Removable screw. It is possible to install the top screw for manual adjustment of the tape position.
M16 anchor bolt holes for attaching to the floor.
The support of chains with track tapes is provided along the length of the chain using guides along the entire length of the chain travel between the sprockets.

Ready to take into account all the wishes for a complete set in the manufacture of the device.

Позвоните нам
+7 (902) 383-61-02

Спросить по E-mail: manager@ooo-komed.ru

Отправляя заявку, Вы разрешаете сбор и обработку персональных данных. Политика конфиденциальности.