Позвоните / Call

+7 (902) 383-61-02
+7 (961) 061-91-12

Наш адрес / Our address

г. Волжский, 7-я Автодорога, стр.48

График /Schedule

пн-пт: 08.00 - 18.00 mo-fr: 08.00 - 18.00
Two-station hydraulic vulcanizing press 600×600 – 1st floor 200 tons

Two-station hydraulic vulcanizing press 600×600 – 1st floor 200 tons

KOMED LLC produces and sells two-station hydraulic vulcanization press 600×600 – 1st floor 200 tons. All details on purchasing this equipment can be found by calling: +7 (902) 383-61-02

Заказать / Order

The two-station hydraulic vulcanization press 600×600-1E 200t consists of two hydraulic vulcanization presses 600×600-1E 200t made on one base frame, column type, controlled independently of each other by one control cabinet and having one single hydraulic station.

The control panel allows you to configure and record parameters from the technological regulations, namely: pressing force, vulcanization time, number of pressings, counter of completed pressings, setting a timer to turn on/off the heating of the plates by time and day of the week.

Video presentation of double-sided press 600×600 – 1st floor 200 tons

Technical characteristics of double-sided hydraulic vulcanizing press 600×600 – 1st floor 200 tons

NameUnit changeMeaning
1Compression force of each stationт200
2Piston stroke, no lessmm320
3Distance between platesmm300
4Slab sizemm600х600
5Number of slabsthings2
6Number of floorsthings1
7Thickness of the top and bottom plates, not lessmm50
8Plate temperature control systemAutomatic, PID controllers
9Plate heating typeElectric, heating elements
10Heating plate power, no morekW7
11Accuracy of plate temperature maintenance±1
12Maximum temperature250
13Engine power, no morekW3
14Total power, no morekW34
15Bed typeColumned
16Number of columnsthings4
17Press opening and closing speed at high speedmm/sec60
18Vulcanization duration adjustableYes, up to 99 min.
19Timer to turn on heatingYes
20Overall dimensions, no moremm4000х1200х2200
21Weight, no morekg8000
22Location of the hydroelectric stationCentered between stations
23Control deviceProgrammable logic controller DELTA
24Operator panelTouch 10”
25Control modeManual / Automatic
26Ability to save set mode parameters for further selectionYes, up to 100 pcs.
27Availability of unloaderOn request

Possibilities of the press control controller

  • setting the holding time for pre-pressing
  • set the pressing pressure and pre-press pressure
  • set the number of pre-presses
  • setting prepress by time or by position sensor
  • setting open time
  • number of pre-presses
  • holding time during vulcanization
  • you can write regulations (recipes) into the memory of the press
  • set a timer by day of the week for preheating

Information on components

  1. Thermal control devices: EMCO – Türkiye, or equivalent
  2. Oil station engine: AIR – Russia, or equivalent
  3. Columns: Chromesteel, factory in Romania, Italian company, or equivalent
  4. Hydraulic plate: OMT, Italy, or equivalent
  5. Pump: Russia or Bulgaria, or equivalent
  6. Electromagnetic hydraulic distributor: China, or equivalent
  7. Electromagnetic contactors: IEK, China, or equivalent
  8. Solid-state relays: ELHART, China, or equivalent
  9. Filters: SIFIMA, Italy, or equivalent
  10. Hydraulic components: fittings, tubes, other hydraulic components – Italy (OMT, ATOS, etc.), or equivalent
  11. Heating elements: Russia
  12. Cuffs and seals: standard, Russia

ORDER BY PHONE +7 (902) 383-61-02

WRITTEN REQUEST CAN BE MADE ON THE PAGE CONTACTS

Заказать / Order
Two-station hydraulic vulcanizing press 600×600 – 1st floor 200 tons
Продукт: Two-station hydraulic vulcanizing press 600×600 – 1st floor 200 tons

Менеджер перезвонит в ближайшее время

    Отправляя заявку, Вы разрешаете сбор и обработку персональных данных. Политика конфиденциальности.