Press for vulcanization of RTI 350×350 – 1st floor 36 tons

1. Compression force 36 tons;
2. Slab size: 350×350 mm;
3. Piston stroke of at least 320 mm;
4. Number of floors: 1;
5. Number of plates: 2 pcs;
6. Heating plate power: no more than 4 kW;
7.Maximum temperature: 250℃;
8. Engine power, no more than 3 kW;
9. Bed type: column;
10. Number of columns: 4 pcs.
11. Accuracy of maintaining the temperature of the plates: +/- 1 ℃.;
12. Overall dimensions, no more than 1060x750x1550 mm.
See Specification (Below) for details.

Заказать / Order

Specification for hydraulic vulcanizing press 350×350 – 1st floor 36 tons

№ п/п	Parameter/ Type	Value
1	Compression force	36 t
2	Piston stroke, no less	320 mm
3	Distance between plates	300 mm
4	Размер плит	350х350 мм
5	Slab size	2 pcs.
6	Number of floors	1 pcs.
7	Thickness of the top and bottom plates, not less	50 mm
8	Plate temperature control system	Automatic, PID controllers
9	Plate heating type	Electric, heating elements
10	Heating plate power, no more	4 kW
11	Accuracy of plate temperature maintenance	±1 ℃
12	Maximum temperature	250 ℃
13	Engine power, no more	3 kW
14	Total maximum power, no more	11 kW
15	Bed type	Columned
16	Number of columns	4 pcs.
17	Opening and closing speed of the press at high speed	60 mm/s
18	Vulcanization time, adjustable	Yes, up to 99 min.
19	Timer to turn on the heating of the press	Yes
20	Overall dimensions, no more	1060х750х1550 mm
21	Weight, no more	900 kg
22	Location of the hydroelectric station	Lateral, right
23	Control device	Programmable relay OVEN
24	Operator panel	Touch 4,3″
25	Control mode	Manual/Automatic

The control controller allows you to:

setting the holding time during pre-pressing;
setting the opening distance by time or by position sensor;
setting the holding time in the open state;
number of prepresses;
curing time during vulcanization;
set a timer by day of the week for preheating.

All of the above parameters are set by the press operator. The PID controller allows for high-precision adjustment and temperature maintenance on the press up to 250℃.

Information on components:

Thermal control devices: EMCO – Türkiye, or equivalent;
Oil station engine: AIR – Russia, or equivalent;
Columns: Chromesteel, factory in Romania, Italian company, or equivalent;
Hydraulic plate: OMT, Italy, or equivalent;
Pump: Russia or Bulgaria, or equivalent;
Electromagnetic hydraulic distributor: China, or equivalent;
Electromagnetic contactors: IEK, China, or equivalent;
Solid state relays: ELHART, China, or equivalent;
Filters: SIFIMA, Italy, or equivalent;
Hydraulic components: fittings, tubes, other hydraulic components – Italy (OMT, ATOS, etc.), or equivalent;
Heating elements: Russia;
Cuffs and seals: standard, Russia.

DOWNLOAD PDF-PRESENTATION

DOWNLOAD PPSX-PRESENTATION

CONTACT THE MANAGER

Video presentation: Hydraulic vulcanization press 350×350, single-story, produced by KOMED LLC

Equipment delivery is not included in the price. Upon agreement, delivery by the Supplier via a trusted carrier is possible to maintain the integrity of the equipment.