Товарная группа: Worm Machines
Information about the operation of the worm machine
- 1. The machine is designed for extruding hot vulcanized silicone mixtures to produce profiles, cords, tubes and other silicone parts, followed by vulcanization in a tunnel oven in a continuous way or other methods;
- 2. The machine can be used to produce blanks from silicone mixtures for vulcanization purposes in presses, etc.;
- 3. The machine can be used for extruding various rubber compounds (based on rubbers BNKS, EPDM, SKI, SKD, BK, HNBR and others) in order to obtain blanks or ready-made profiles for vulcanization, like a warm feed machine of the MChT type.
More detailed information about each type of equipment is provided below.
Worm machine 65×10 can be part of the line for the production of silicone products and parts. Equipment and purpose Silicone rubber processing machines are equipped with a cooling system, or...
Information on the operation of the worm machine 65×10 (22 kW) This FM is intended for the extrusion of hot vulcanized silicone mixtures to produce profiles, cords, tubes and other silicone...
Information on the operation of the worm machine 65×15 (30 kW) This FM is intended for the extrusion of hot vulcanized silicone mixtures to produce profiles, cords, tubes and other silicone...
Information on the operation of the worm machine 32×10 This FM is intended for the extrusion of hot vulcanized silicone mixtures to produce profiles, cords, tubes and other silicone parts,...