Hydraulic vulcanization press 400×400 – 1st floor

To clarify the price and on the purchase of this equipment, please contact our Sales Department by phone:

+7 (902) 383-61-02

E-Mail: MANAGER@OOO-KOMED.RU

Technical characteristics of the press, video work, photos and dimensions are presented below.

To ask a question, click the order button.

Specification for hydraulic vulcanizing press 400×400 – 1st floor 65 tons

№ п/п	Parameter/ Type	Value
1	Compression force	65 t
2	Piston stroke, no less	320 mm
3	Distance between plates	300 mm
4	Размер плит	400х400 мм
5	Slab size	2 pcs.
6	Number of floors	1 pcs.
7	Thickness of the top and bottom plates, not less	50 mm
8	Plate temperature control system	Automatic, PID controllers
9	Plate heating type	Electric, heating elements
10	Heating plate power, no more	4 kW
11	Accuracy of plate temperature maintenance	±1 ℃
12	Maximum temperature	250 ℃
13	Engine power, no more	3 kW
14	Total maximum power, no more	11 kW
15	Bed type	Columned
16	Number of columns	4 pcs.
17	Opening and closing speed of the press at high speed	60 mm/s
18	Vulcanization time, adjustable	Yes, up to 99 min.
19	Timer to turn on the heating of the press	Yes
20	Overall dimensions, no more	1400х700х1800 mm
21	Weight, no more	1300 kg
22	Location of the hydroelectric station	Rear
23	Control device	Programmable relay OVEN
24	Operator panel	Touch 4,3″
25	Control mode	Manual/Automatic

Dimensions

Габаритные размеры гидравлического вулканизационного пресса 400х400 - 1Э

Video-presentation

The control controller allows you to:

setting the holding time during pre-pressing;
setting the opening distance by time or by position sensor;
setting the holding time in the open state;
number of prepresses;
curing time during vulcanization;
set a timer by day of the week for preheating.

All of the above parameters are set by the press operator. The PID controller allows for high-precision adjustment and temperature maintenance on the press up to 250℃.

Information on components:

Thermal control devices: EMCO – Türkiye, or equivalent;
Oil station engine: AIR – Russia, or equivalent;
Columns: Chromesteel, factory in Romania, Italian company, or equivalent;
Hydraulic plate: OMT, Italy, or equivalent;
Pump: Russia or Bulgaria, or equivalent;
Electromagnetic hydraulic distributor: China, or equivalent;
Electromagnetic contactors: IEK, China, or equivalent;
Solid state relays: ELHART, China, or equivalent;
Filters: SIFIMA, Italy, or equivalent;
Hydraulic components: fittings, tubes, other hydraulic components – Italy (OMT, ATOS, etc.), or equivalent;
Heating elements: Russia;
Cuffs and seals: standard, Russia.

DOWNLOAD PDF-PRESENTATION

DOWNLOAD PPSX-PRESENTATION

CONTACT THE MANAGER